How to wire a hs55 in a xmod truck

[silverwulf]

Hi everyone, Im new to xmods trucks and seem to be late to the party!
I got a titan and a hummer from ebay recently. The performance on not so good. Hummer is still NIB. Titan has 4wd set, off road lift and tire set. I put the spin brush magnets stg 1 motor w/ 12, 23 gearing. I cant even drive it now. The front wheels get too much toe out when driving that it hist the body and stops! The steering is glitchy and reverse is intermitant...
WTF did I do wrong. I got a hs55 from hobby shop and want to use as crawler motor but bont know how I should wire it.
I have full bearings and a bunch of gpm stuff comming hoping to fix steering slop. Aluminum gearboxes and tierod and cvd's and rims... also atomic gears, gpm fr diff and I am going to lock stock rear diff.

I need some tips on wiring the hs55 servo for a motor tho.

Any tips or advice is well appreciated.
Thanks

[madcat303]

Open it up solder wires to the motor of the servo to your board. Next, the main gear has something to stop it fromt turning all the way, cut it. Then you have to make a custom mount to your moto "spot"